Were you sent here from the Hydraulic Brake Symptom table?

Go to Step 2

Go to Diagnostic Starting Point - Hydraulic Brakes

Inspect the hydraulic brake system for proper operation. Refer to Hydraulic Brake System Diagnosis .

Did you find and correct a condition?

Go to Step 6

Go to Step 3

Inspect the disc brake system for proper operation. Refer to Disc Brake System Diagnosis .

Did you find and correct a condition?

Go to Step 6

Go to Step 4

1. Separate the master cylinder from the vacuum brake booster. Do not disconnect any brake pipes. Refer to Master Cylinder Replacement .
2. Inspect the rear of the master cylinder for a brake fluid leak.
3. Inspect for brake fluid in the vacuum brake booster.

Did you find a brake fluid leak?

Go to Step 5

Go to Diagnostic Starting Point - Hydraulic Brakes

Replace the brake master cylinder and the vacuum brake booster. Refer to Master Cylinder Replacement and Power Vacuum Brake Booster Replacement .

Did you complete the replacement?

Go to Step 6

--

1. Install or connect components that were removed or disconnected during diagnosis.
2. Road test the vehicle to confirm proper operation. Refer to Brake System Vehicle Road Test .

Is the condition still present?

Go to Step 2

System OK