Removal Procedure
- Remove the headliner. Refer to
Headlining Trim Panel Replacement
.
- Disconnect the antenna cable from the antenna base cable connector.
- Remove the retainer clips from the antenna cable.
- Open the right side end cap from the instrument panel (I/P) to disconnect the cable connectors.
- Disconnect the antenna cable from the digital radio receiver.
- Remove the antenna cable retainers from the receiver bracket.
- Remove the antenna cable.
Installation Procedure
- Install the antenna cable retainers to the receiver bracket.
- Connect the antenna cable to the digital radio receiver.
- Install the cable connectors to the right side end cap on the I/P.
- Install the antenna cable retainer clips.
- Connect the antenna cable to the antenna base cable connector.
- Install the headliner. Refer to
Headlining Trim Panel Replacement
.