Removal Procedure
- Remove the courtesy lamp lens to gain access to the overhead console screw.
- Remove the overhead console screw.
- Grasp the overhead console and pull downward to disengage the retainers securing the overhead console to the
vehicle.
- Disconnect the electrical connectors.
- Remove the overhead console from the vehicle.
Installation Procedure
- Position the overhead console in the vehicle.
- Connect the electrical connectors.
- Align the retainers to the openings in the vehicle.
- Push the overhead console upward until the retainers engage securing the overhead console to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the overhead console screw.
Tighten
Tighten the screw to 2 N·m (18 lb in).
- Install the courtesy lamp lens.