GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 Montana SV6 Ext. 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Washer Pump Replacement

Removal Procedure
  1. Remove the washer solvent from the washer solvent container.
  2. Disconnect the front washer pump electrical connector.
  3. Disconnect the front washer pump hose.

    4. Object Number: 1480124 Size: SH
  4. Using a small flat-bladed tool, remove the front washer pump (3) from the washer solvent container.
  5. Using a small flat-bladed tool, remove the seal from the washer solvent container.

Installation Procedure

    Object Number: 1480124 Size: SH
  1. Position the seal to the washer solvent container pressing in until fully seated.
  2. Position the front washer pump (3) to the washer solvent container pressing in until fully seated.
  3. Connect the front washer pump hose.
  4. Connect the front washer pump electrical connector.
  5. Fill the washer solvent container with washer solvent.
  6. Inspect for leaks.