Caution: Following the deployment of a side impact air bag, inspect the following parts for damage. Replace these parts if necessary:

1. Disable the SIR, if equipped. Refer to SIR Disabling and Enabling .
2. Remove the rear seat from the vehicle. Refer to Rear Seat Replacement .
3. Remove the rear seat back panel. Refer to Rear Seat Back Cushion Trim Panel Replacement .

1

Armrest Assembly

Refer to Rear Seat Armrest Replacement .

2

Head Restraint Assembly

Refer to Front Seat Head Restraint Replacement .

3

Seat Back Cushion Cover

Refer to Rear Seat Back Cushion Cover and Pad Replacement .

4

Side Impact Inflatable Restraint Nut (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
5 N·m (44 lb in)

5

Inflatable Restraint Module Assembly

Tip

1. Disconnect the electrical connector.
2. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping .

6

Side Impact Air Bag Escutcheon Cover