GM Service Manual Online
For 1990-2009 cars only

Auxiliary Blower Motor Relay Replacement for Pontiac Montana SV6 Ext. 2008

Removal Procedure

  1. Remove the left lower quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side .
  2. Disconnect blower motor relay electrical connector.
  3. Remove the blower motor relay bolts/screws.
  4. Remove the blower motor relay.

Installation Procedure

  1. Install the blower motor relay.
  2. Connect the blower motor relay electrical connector.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the blower motor relay bolts/screws.
  5. Tighten
    The bolts/screws to 1.6 N·m (14 lb in).

  6. Install the left lower quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side .