GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Montana SV6 Ext. 🢒 Engine 🢒 Engine Controls and Fuel - 3.9L 🢒 Stabilizer Shaft Link Replacement

Removal Procedure
  1. Raise the vehicle and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 1544893 Size: SH
  2. Remove the stabilizer shaft link upper nut (1).
  3. Remove the stabilizer shaft link lower nut (3).
  4. Remove the stabilizer shaft link (2) from the suspension strut and stabilizer shaft.

Installation Procedure

    Object Number: 1544893 Size: SH
  1. Install the stabilizer link (2) to the suspension strut and stabilizer shaft.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the stabilizer shaft link nuts and tighten to 45 N·m (33 lb ft) .
  3. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  4. Lower the vehicle.