GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Montana SV6 Ext. 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Seat Belt Retractor Pretensioner Replacement - Right Front

Removal Procedure
  1. Disable the SIR system. Refer to SIR Disabling and Enabling.

    2. Object Number: 620838 Size: SH
  2. Remove the front bucket seat. Refer to Front Seat Replacement - Bucket.
  3. Remove the front seat belt anchor from the rear outboard stud.

    4. Object Number: 620834 Size: SH
  4. Open the seat belt guide loop cover.
  5. Remove the nut from seat belt guide loop.

    6. Object Number: 620836 Size: SH
  6. Remove the seat belt guide loop from the guide adjuster bracket.

    7. Object Number: 620831 Size: SH
  7. Remove the center pillar lower trim. Refer to Center Pillar Lower Trim Panel Replacement.
  8. Remove the bolt from the seat belt retractor.

    9. Object Number: 620833 Size: SH
  9. Remove the seat belt retractor from the center pillar.
  10. Remove the front seat belt from the vehicle.

Installation Procedure

    Object Number: 620833 Size: SH
  1. Install the seat belt retractor to the center pillar.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 620831 Size: SH
  2. Install the bolt to the seat belt retractor and tighten to 42 N·m (31 lb ft .
  3. Install the center pillar lower trim. Refer to Center Pillar Lower Trim Panel Replacement.

    4. Object Number: 620836 Size: SH
  4. Place the seat belt guide loop to the guide adjuster bracket.

    5. Object Number: 620834 Size: SH
  5. Install the nut to the seat belt guide loop and tighten to 42 N·m (31 lb ft) .
  6. Install the seat belt guide loop cover.

    7. Object Number: 620838 Size: SH
  7. Place the seat belt anchor plate to the seat rear outboard stud.
  8. Install the front bucket seat. Refer to Front Seat Replacement - Bucket.
  9. Enable the SIR system. Refer to SIR Disabling and Enabling.