| Table 1: | Radio Scan Tool Data Parameters |
| Table 2: | Radio Scan Tool Output Controls |
Parameter | System State | Expected Value | Definition |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Antenna Enable | -- | Active | The scan tool displays Active or Inactive. This parameter indicates if the navigation radio has enabled the GPS antenna. |
Balance Control | -- | Varies | The scan tool displays a numeric value. This is the current value of the balance control. |
Band Status | -- | Varies | The scan tool displays AM/FM1/FM2/XM1/XM2. This is the current band setting. |
Bass Control | -- | Varies | The scan tool displays %. This is the current percentage of the bass control. |
Battery Voltage Signal | -- | Varies | The scan tool displays Volts. This is the current battery voltage. |
DRR | -- | Varies | The scan tool displays Present or Not Present. Present is displayed if a digital radio receiver is properly installed or programmed on the vehicle. |
Fade Control | -- | Varies | The scan tool displays a numeric value. This is the current fade control value. |
Ign. Cycles Since last DTC | -- | Varies | The scan tool displays the number of ignition cycles since the last DTC. |
Mid Range Control | -- | Varies | The scan tool displays %. This is the current percentage of the mid range control. |
Personalization Status | -- | Varies | The scan tool displays Unknown, Driver 1, Driver 2. This is the current driver. |
Phone Signal | -- | Present | The scan tool displays Present or Not Present. This indicates if the radio detects the vehicle is equipped with OnStar. |
Power Mode | -- | Varies | The scan tool displays Run,Crank, RAP, Off Awake, Unlock, RAP Unlock and Off Awake. This is the current state of the ignition cylinder. |
Signal Strength | -- | Varies | The signal strength of the currently tuned station is measured in dBuV. |
Source Status | -- | Varies | The scan tool displays Unknown, Radio Off, Tuner, CD, RDS Interrup, CDX, Aux. Device, Phone or DRR Tuner. This is the current source/type of the signal being received/played. |
Theft Armed | -- | Learned VIN | The scan tool displays Learned or Not Learned. This shows whether the VIN is learned in the theft module. |
Theft Armed | -- | Learned | The scan tool displays Learned or Not Learned. |
Theft Lock Status | -- | Inactive | The scan tool displays Active or Inactive. This is the current state of the theft module. |
Treble Control | -- | Varies | The scan tool displays %. This is the current treble percentage. |
Volume Control | -- | Varies | The scan tool displays &. This is the current volume control percentage. |
Scan Tool Output Control | Description |
|---|---|
Optional Modules | Configures for Disc player and video display, Digital Radio Receiver, Steering wheel controls, Vehicle Communication Interface Module. This will synchronize the optional modules to the radio. |
Region Code Options | The scan tool will provide selection for Region Code Options for North America, Middle East and South America. This is the current region code of the radio. |
VIN Relearn | The scan tool will do a VIN Relearn. Enters the correct VIN information in the radio |
