GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Montana SV6 Ext. 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Digital Radio Receiver Replacement

Removal Procedure

    Object Number: 318206 Size: SH

    Note: Do not exchange digital radio receivers between vehicles. Exchanging digital receivers between vehicles will activate the digital radio Theftlock. "XM Theftlock" will be displayed.

  1. Remove the left instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Panel Replacement .

    2. Object Number: 955738 Size: SH
  2. Remove the receiver bracket nuts.
  3. Remove the receiver from the bracket.
  4. Disengage the electrical connector and the antenna connectors from the XM radio receiver.

    5. Object Number: 955754 Size: SH
  5. Remove the XM digital radio receiver from the vehicle.

Installation Procedure

    Object Number: 955738 Size: SH
  1. Install the XM digital radio receiver to the receiver bracket.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the radio receiver nuts and tighten to 4 N·m (35 lb in) .

    3. Object Number: 955754 Size: SH
  3. Connect the electrical connectors and the antenna connectors to the XM radio receiver.

    4. Object Number: 318206 Size: SH
  4. Install the left I/P insulator. Refer to Instrument Panel Insulator Panel Replacement .
  5. Perform the setup procedure for the digital radio receiver. Refer to Control Module References for programming and setup information.