GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Montana SV6 - AWD 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Digital Radio Antenna Cable Replacement

Removal Procedure

    Object Number: 914898 Size: SH
  1. Remove the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
  2. Disconnect the antenna cable from the antenna base cable connector.
  3. Remove the retainer clips from the antenna cable.
  4. Remove the right instrument panel (I/P) insulator. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel.

    5. Object Number: 1132274 Size: SH
  5. Disconnect the cable connectors.

    6. Object Number: 955754 Size: SH
  6. Disconnect the antenna cable from the digital radio receiver.
  7. Remove the antenna cable retainers from the receiver bracket.
  8. Remove the right windshield pillar garnish molding. Refer to Windshield Pillar Garnish Molding Replacement.
  9. Remove the antenna cable.

Installation Procedure

    Object Number: 914898 Size: SH
  1. Install the antenna cable retainers to the receiver bracket.
  2. Install the right windshield pillar garnish molding. Refer to Windshield Pillar Garnish Molding Replacement.

    3. Object Number: 955754 Size: SH
  3. Connect the antenna cable to the digital radio receiver.

    4. Object Number: 1132274 Size: SH
  4. Install the cable connectors.
  5. Install the right I/P insulator. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel.

    6. Object Number: 956421 Size: SH
  6. Install the antenna cable retainer clips.
  7. Connect the antenna cable to the antenna base cable connector.
  8. Install the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.