GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2004 🢒 Montana - 4WD 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Link Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.

    3. Object Number: 629209 Size: SH
  3. Use a wrench in order to hold the stabilizer shaft link. Remove the stabilizer shaft link nuts.
  4. Remove the stabilizer shaft link.

Installation Procedure

    Object Number: 629209 Size: SH
  1. Install the stabilizer shaft link.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the stabilizer shaft link nuts.

    3. Tighten
    Tighten the stabilizer shaft link nuts to 40 N·m (30 lb ft).

  3. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Lower the vehicle.