For 1990-2009 cars only
Removal Procedure
- Use a heat gun to heat the rear bumper fascia reflectors. Hold the heat gun 152 mm (6 in) from the surface.
- Use a circular motion for 30 seconds when applying heat to the surface.
- Use a flat-bladed tool to peel the rear bumper fascia reflectors from the rear bumper fascia surface.
- Use a lint free cloth and Varnish Makers and Painters (VMP) naphtha or a 50/50 mixure by volume of isopropyl alchohol and water to clean the area.
Important: Be careful not to scratch paint with the flat-bladed tool.
Installation Procedure
- Warm the rear bumper fascia with a heat lamp or heat gun to a minimum of 21°C (70°F).
- Peel the backing from the front end of the rear bumper fascia reflectors.
- Press the rear bumper fascia reflectors to the rear fascia while continuing to remove the backing.
- Hand roll the rear bumper fascia reflectors to the rear fascia in order to ensure proper adhesion.
Important: DO NOT touch the adhesive backing.
