GM Service Manual Online
For 1990-2009 cars only

NO REVERSE/NEUTRAL-125/125C DELAYED REVERSE REPAIR PROC.

SOME 1980 THROUGH 1983 THM 125/125-C TRANSAXLES MAY EXHIBIT A NO REVERSE OR NEUTRAL TO REVERSE DELAYED ENGAGEMENT CONDITION. TO CORRECT THESE CONDITIONS, TWO CHANGES IN THE LOW AND REVERSE CLUTCH ASSEMBLY (FIGURE 5) WERE INTRODUCED IN LATE MARCH 1983. THE LOW AND REVERSE PISTON ASSEMBLY IS BEING PRODUCED WITH A THIRD DESIGN LIP SEAL RETAINER (FIGURE 1) AND AN OIL DISPLACEMENT INSERT (FIGURE 2) WAS ADDED TO THE LOW AND REVERSE CLUTCH ASSEMBLY. THIS INSERT DISPLACES OIL AND QUICKENS THE APPLY OF THE LOW AND REVERSE CLUTCH. WHEN SERVICING ANY 1980 THROUGH 1983 THM 125/125-C TRANSAXLE FOR A NO REVERSE OR A NEUTRAL TO REVERSE DELAYED ENGAGEMENT, REFER TO THE FOLLOWING CHART: TYPE OF LOW AND CONDITION REVERSE CLUTCH ASM. CORRECTION NO REVERSE-LIP SEAL FIRST DESIGN REPLACE THE LOW RETAINER HAS SEPARATED_____(FIGURE 3)_______________AND REVERSE CLUTCH FROM THE LOW AND REVERSE ASSEMBLY WITH PISTON ASSEMBLY SERVICE PACKAGE NO. 8653915. ALSO ADD THE OIL DIS- PLACEMENT INSERT (PART NO.8643490)

NEUTRAL TO REVERSE FIRST DESIGN REPLACE THE LOW DELAYED ENGAGEMENT (FIGURE 3) AND REVERSE CLUTCH ASSEMBLY WITH SER- VICE PACKAGE NO. 8653915. ALSO ADD THE OIL DISPLACE- MENT INSERT (PART NUMBER 8643490).

NO REVERSE-LIP SEAL________SECOND DESIGN REPLACE THE SEC- RETAINER HAS SEPARATED (FIGURE 4) OND DESIGN LOW AND FROM LOW AND REVERSE REVERSE PISTON PISTON ASSEMBLY WITH A THIRD DES- IGN LOW AND RE- VERSE PISTON (PART NO. 8653916).

NEUTRAL TO REVERSE SECOND DESIGN ADD THE OIL DIS DELAYED ENGAGEMENT (FIGURE 4) PLACEMENT INSERT (PART NO. 8643490) TO THE LOW AND RE- VERSE CLUTCH ASSM.


Object Number: 87294  Size: LF


Object Number: 87550  Size: LF


Object Number: 87293  Size: MF


Object Number: 87292  Size: MF


Object Number: 87291  Size: MF

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.