Removal Procedure
- Remove the air cleaner outlet duct .
- Remove the air cleaner assembly attachment fasteners.
- Remove the air cleaner.
Installation Procedure
Important: Verify full engagement of the inlet onto the resonator neck.
- Position the air cleaner assembly.
Notice: Refer to Fastener Notice in the Preface section.
- Install the air cleaner assembly attachment bolts.
Tighten
Tighten the bolts to 10 N·m (89 lb in).
- Connect the air cleaner resonator to the air cleaner assembly.
Tighten
Tighten the air cleaner outlet duct clamps to 5 N·m (44 lb in).