Removal Procedure
- Remove the headliner. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
Important: If the sunroof window is partially closed, remove the actuator first before moving the sunroof window forward.
- Disconnect the motor/actuator harness from the sunroof module.
- Disconnect the electrical connector from the sunroof motor/actuator.
- Remove the sunroof motor/actuator bolts (2) from the sunroof module.
- Remove the sunroof actuator (1) from the sunroof module.
Installation Procedure
- Synchronize the sunroof motor/actuator (1). Refer to
Sunroof Motor Synchronization
.
- Install the sunroof motor/actuator (1) to the sunroof module.
Notice: Refer to Fastener Notice in the Preface section.
- Install the sunroof motor/actuator bolts (2).
Tighten
Tighten the bolts to 5 N·m (44 lb in).
- Connect the electrical connector to the sunroof motor/actuator.
- Secure the electrical harness to the sunroof module.
- Verify the sunroof operation.
- Install the headliner. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Refer to
Control Module References
for programming and setup information.