Removal Procedure
- Disconnect the mass air flow (MAF)/intake air temperature (IAT) sensor electrical connector (1).
- Unlatch the upper air cleaner cover retainer clips.
- Remove the upper air cleaner cover.
- Remove the air cleaner filter from the lower air cleaner housing.
- Inspect the air cleaner filter for dust, dirt and water contamination.
- Replace as necessary. Refer to
Maintenance Schedule
.
Installation Procedure
- Install the air cleaner filter into the lower air cleaner housing.
- Install the upper air cleaner cover to the lower air cleaner housing.
- Latch the upper air cleaner cover retainer clips.
- Connect the MAF/IAT sensor electrical connector (1).