Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Remove the drive belt. Refer to Drive Belt Replacement .

1

Connector, Engine Harness Generator

2

Boot, Engine Harness Ground Terminal

3

Nut, Engine Harness Ground Terminal

Tighten
20 N·m (15 lb ft)

4

Terminal, Engine Harness Ground

5

Bolt, Generator (Qty: 3)

Tighten
22 N·m (16 lb ft)

6

Generator