Callout
| Component Name
|
|
Caution: Refer to Brake Fluid Irritant Caution in the Preface section.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in the Preface section.
Preliminary Procedures
- Using a suitable suction device, remove the brake fluid from the master cylinder reservoir.
- Disconnect the brake fluid level sensor electrical connector.
- On manual transmission vehicles, disconnect the clutch hose from the master cylinder reservoir and cap the hose.
|
1
| Bolt, Brake Master Cylinder Reservoir
Notice: Refer to Fastener Notice in the Preface section.
Tighten
8 N·m (71 lb in) |
2
| Reservoir, Brake Master Cylinder
Tip
| • | If installing a replacement reservoir on manual transmission vehicles, twist the cap off of the master cylinder reservoir. |
| • | Ensure the outlet port is free debris and contamination. |
|
3
| Seal, Brake Master Cylinder Reservoir (Qty: 2)
Tip
| • | DO NOT reuse the seals. Install new seals. |
| • | Lubricate the seals with clean DOT 3 motor vehicle brake fluid. |
|
