GM Service Manual Online
For 1990-2009 cars only

Object Number: 1584159  Size: SF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

  1. Open the hood.
  2. Reach in between the bumper and front hood opening to disconnect the lamp socket electrical connectors.

1

Bulb, Park and Turn Signal Lamp

Tip
Rotate the bulb socket counterclockwise from the lamp housing in order to remove.

2

Bulb, Front Fog Lamp

Tip
Rotate the bulb socket counterclockwise from the lamp housing in order to remove.

3

Screws, Front Park and Turn Signal and Fog Lamp Assembly

Tighten
2 N·m (18 lb in)

4

Lamp Assembly, Front Park and Turn Signal and Fog

Tip
Pull the lamp housing forward in order to remove.


Object Number: 1850271  Size: SF

Callout

Component Name

Preliminary Procedure

Remove the wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .

1

Front Park and Turn Signal and Fog Lamp Assembly Screws (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Front Park and Turn Signal and Fog Lamp Assembly

Tip
Disconnect and remove the electrical jumper harness, bulbs and remove the lamp assembly from inside the front bumper fascia.