Tools Required
J 43625 Lift Pad Adapter
Important: The use of a LOW PROFILE LIFT ARMS SYSTEM may be required to avoid unwanted contact with the vehicle's body and structure depending on lifting equipment used. Refer to the manufacture's recommendation for their applications of low profile lift arms system for their lifting equipment.
Caution: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.
Caution: To avoid any vehicle damage, serious personal injury or death, always use the jackstands to support the vehicle when lifting the vehicle with a jack.
Notice: Perform the following steps before beginning any vehicle lifting or
jacking procedure:
• Remove or secure all of the vehicle's contents in order to avoid
any shifting or any movement that may occur during the vehicle lifting or
jacking procedure. • The lifting equipment or the jacking equipment weight rating must
meet or exceed the weight of the vehicle and any vehicle contents. • The lifting equipment or the jacking equipment must meet the operational
standards of the lifting equipment or jacking equipment's manufacturer. • Perform the vehicle lifting or jacking procedure on a clean, hard,
dry, level surface. • Perform the vehicle lifting or jacking procedure only at the identified
lift points. DO NOT allow the lifting equipment or jacking equipment to contact
any other vehicle components.
Vehicle Lifting - Frame Contact Lift and/or Vehicle Jacking with Service Jack
Front Lift Pads
When lifting the vehicle with a frame-contact lift and/or vehicle jacking with service jack, place the front lift pads as shown.
Rear Lift Pads
- Install the J 43625 (1) into the rear frame rail shipping slots, lock into place and position the rear hoist pads.
- When lifting the vehicle with a frame-contact lift and/or vehicle jacking with service jack, place the rear lift pads as shown.
Vehicle Jacking with Service Jack
Important: When you are lifting a vehicle with a vehicle jack or a service jack, block the wheels at the opposite end from which you are lifting. Use jack stands to provide additional support.
Lift the front/rear of the vehicle by placing the floor jack lift pad as shown.
Supporting the Vehicle with Jackstands
Important: Place jackstands ONLY under strong and stable vehicle structures.
