1

Rear License Plate Lamp Assembly Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Rear License Plate Lamp Assembly

Tip
Push one side of the lamp assembly inside the rear bumper cover hole and pull downward to disconnect the electrical connector.

3

Rear License Plate Electrical Connector

Tip
Twist the socket counterclockwise in order to remove from the lamp housing.

4

Rear License Plate Bulb

Tip
Replace the bulb as needed.

1

Rear License Plate Lamp Assembly

Procedure

1. Depress the outboard tabs securing the lamp assembly to the rear bumper fascia.
2. Swing the lamp assembly downward.
3. Disconnect the electrical connector.

2

Rear License Plate Lamp Socket

Procedure

1. Twist the lamp socket counterclockwise in order to remove from the lamp housing.
2. Replace the bulb, as needed.