Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Open the hood.
2. Reach in between the bumper and front hood opening to disconnect the lamp socket electrical connectors.

1

Bulb, Park and Turn Signal Lamp

Tip
Rotate the bulb socket counterclockwise from the lamp housing in order to remove.

2

Bulb, Front Fog Lamp

Tip
Rotate the bulb socket counterclockwise from the lamp housing in order to remove.

3

Screws, Front Park and Turn Signal and Fog Lamp Assembly

Tighten
2 N·m (18 lb in)

4

Lamp Assembly, Front Park and Turn Signal and Fog

Tip
Pull the lamp housing forward in order to remove.

Preliminary Procedure

Remove the wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .

1

Front Park and Turn Signal and Fog Lamp Assembly Screws (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Front Park and Turn Signal and Fog Lamp Assembly

Tip
Disconnect and remove the electrical jumper harness, bulbs and remove the lamp assembly from inside the front bumper fascia.