Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Open the hood.
2. Disconnect the washer hose at the driver side hinge pillar to air inlet grille panel.
3. Disconnect the washer hose retention clip.
4. Remove the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
5. Remove the washer hose from the washer pump spout.
6. Drain the washer solvent into a suitable container.
7. Disconnect the hose from the washer container.

1

Connection, Windshield Washer Pump Hose to Air Inlet Grille Panel Hose

2

Clip, Washer Hose Retention

3

Hose, Washer Solvent Container to Washer Pump

Tip
Ensure washer hose is re-routed properly to the washer solvent container and secured.

Preliminary Procedures

1. Open the hood.
2. Disconnect the washer hose at the driver side hinge pillar to air inlet grille panel.
3. Disconnect the washer hose retention clip.
4. Remove the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
5. Remove the washer hose from the washer pump spout.
6. Drain the washer solvent into a suitable container.
7. Disconnect the hose from the washer container.

1

Windshield Washer Pump Hose to Air Inlet Grille Panel Hose Connection

2

Washer Hose Retention Clip

3

Washer Solvent Container to Washer Pump Hose

Tip
Ensure washer hose is re-routed properly to the washer solvent container and secured.