GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Solstice 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure

    Object Number: 1716603 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Disconnect the engine wiring harness electrical connector (2) from the engine oil pressure sensor.

    3. Object Number: 630350 Size: SH
  3. Remove the engine oil pressure sensor.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 630350 Size: SH
  1. Install the engine oil pressure sensor and tighten to 22 N·m (16 lb ft).

    2. Object Number: 1716603 Size: SH
  2. Connect the engine wiring harness electrical connector (2) to the engine oil pressure sensor.
  3. Lower the vehicle.