- Remove the key from the
ignition switch.
- Install the yellow 2-way connector and install the CPA to the
inflatable restraint IP module pigtail (1).
- Connect the connector and lock the connector with the connector
lock lever.
- Close the IP compartment.
- Install the yellow 2-way connector (1) and install the CPA (2)
for the inflatable restraint steering wheel module and the steering wheel
side cap.
- Connect the connector and lock the connector with the connector
lock lever.
- Install the AIR BAG Fuse (3) to the fuse block.
- Staying well away from both air bags, turn the ignition switch
to the ON position. Verify that the AIR BAG warning lamp flashes seven times
and then stays OFF. If the AIR BAG warning lamp does not operate as described,
refer to
SIR Diagnostic System Check
.