Did you perform the Daytime Running Lamps (DRL) System Check?

--

Go to Step 2

Go to Daytime Running Lights (DRL) System Check

1. Disconnect the turn/hazard headlamp switch assembly connector C1.
2. Use a fused jumper in order to ground terminal E of the turn/headlamp hazard switch assembly.

Do the headlamps operate properly?

--

Go to Step 3

Go to Step 4

Locate and repair an open or bad connection in CKT 350 between the turn/hazard headlamp switch assembly and ground. Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Daytime Running Lights (DRL) System Check

--

Replace the turn/hazard headlamp switch assembly. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Standard.

Did you complete the repair?

--

Go to Daytime Running Lights (DRL) System Check

--