Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Steering Wheel Control System Check? | -- | Go to Step 2 | |
2 |
Did the test light illuminate? | -- | Go to Step 3 | Go to Step 7 |
3 |
Did the resistance measure within the specified range? | 0-4 ohms | Go to Step 4 | Go to Step 13 |
4 |
Does the resistance measure within the specified range? | 0-2 ohms | Go to Step 5 | Go to Step 9 |
5 | Use the J 39200 in order to measure the resistance in CKT 350 between the SIR coil assembly connector terminal D and ground. Does the resistance measure within the specified range? | 0-2 ohms | System OK | Go to Step 6 |
6 | Repair the open circuit condition in CKT 350 between the SIR coil assembly harness connector terminal D and ground. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | System OK | -- |
7 |
Did the test light illuminate? | -- | Go to Step 12 | Go to Step 8 |
8 |
Did the test light illuminate? | -- | Go to Step 9 | Go to Step 10 |
9 | Replace the SIR coil assembly. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement in Supplemental Inflatable Restraint. Did the test light illuminate? | -- | System OK | -- |
10 |
Did the test light illuminate? | -- | Go to Step 11 | Go to Lighting Systems |
11 | Repair the open circuit condition in CKT 8 between the SIR coil assembly connector terminal B and the inline C275, connector terminal 7. Refer to Wiring Repairs in Wiring Systems Did you complete the repair? | -- | System OK | -- |
12 | Use the J 39200 in order to measure the resistance in CKT 8 between the steering wheel controls connector terminal B and ground. Does the measured resistance equal the specified range? | ∞ | Go to Step 13 | Go to Step 14 |
13 | Replace the bulbs in the steering wheel controls. Refer to Steering Wheel and Column. Did you complete the repair? | -- | System OK | Go to Step 14 |
14 | Replace the steering wheel controls. Refer to Steering Wheel and Column. Did you complete the repair? | -- | System OK | -- |
