Step
| Action
| Value(s)
| Yes
| No
|
1
| Did the perform the Power Windows System Check?
| --
| Go to
Step 2
| Go to
Power Windows System Check
|
2
|
- Turn the ignition switch to the RUN position.
- Place the rear window lockout switch in the OFF position.
- Backprobe the master window switch harness connector C2.
Use a J 39200
Digital
Multimeter (DMM) in order to measure the voltage between terminal H
and ground.
- Place the left rear window switch on the master window switch
in the DOWN position.
Does the voltage equal the specified value?
| B+
| Go to
Step 3
| Go to
Step 5
|
3
|
- Backprobe the master window switch harness connector C2.
Use the J 39200
DMM in
order to measure the voltage between terminal C and ground.
- Place the left rear window switch on the master window switch
in the UP position.
Does the voltage equal the specified value?
| B+
| Go to
Step 4
| Go to
Step 5
|
4
|
- Disconnect the left rear window switch.
- Use the J 39200
DMM in order to measure the voltage between terminal A of the left
rear window switch harness connector and ground.
- Place the left rear window switch on the master window switch
in the DOWN position.
Does the voltage equal the specified value?
| B+
| Go to
Step 6
| Go to
Step 7
|
5
| Replace the master window switch. Refer to
Front Side Door Window Switch Replacement
.
Did you complete the repair?
| --
| Go to
Power Windows System Check
| --
|
6
|
- Use the J 39200
DMM in order to measure the voltage between terminal G of the left
rear window switch harness connector and ground.
- Place the left rear window switch on the master window switch
in the UP position.
Does the voltage equal the specified value?
| B+
| Go to
Step 8
| Go to
Step 9
|
7
| Repair the open in CKT 169 between the master window switch and
the left rear window switch. Refer to
Wiring Repairs
in Wiring Systems.
Did you complete the repair?
| --
| Go to
Power Windows System Check
| --
|
8
|
- Connect a fused jumper between terminal A and terminal B
of the left rear window switch harness connector.
- Connect a fused jumper between terminal C and terminal G
of the left rear window switch harness connector.
- Place the left rear window switch on the master window switch
in the UP and DOWN positions.
Does the left rear window operate?
| --
| Go to
Step 10
| Go to
Step 11
|
9
| Repair the open in CKT 168 between the master window
switch and the left rear window switch. Refer to
Wiring Repairs
in Wiring Systems.
Did you complete the repair?
| --
| Go to
Power Windows System Check
| --
|
10
| Replace the left rear window switch. Refer to
Front Side Door Window Switch Replacement
.
Did you complete the repair?
| --
| Go to
Power Windows System Check
| --
|
11
|
- Reconnect the left rear window switch.
- Disconnect the left rear window motor.
- Use the J 39200
DMM in order to measure the voltage between terminal A of the left
rear window motor harness connector and ground.
- Place the left rear window switch on the master window switch
in the DOWN position.
Does the voltage equal the specified value?
| B+
| Go to
Power Windows System Check
| Go to
Step 13
|
12
|
- Use the J 39200
DMM in order to measure the voltage between terminal B of the left
rear window motor harness connector and ground.
- Place the left rear window switch on the master window switch
in the UP position.
Does the voltage equal the specified value?
| B+
| Go to
Step 14
| Go to
Step 15
|
13
| Repair the open in CKT 669 between the left rear window switch
and the left rear window motor. Refer to
Wiring Repairs
in Wiring Systems.
Did you complete the repair?
| --
| Go to
Power Windows System Check
| --
|
14
| Replace the left rear window motor. Refer to
Front Side Door Window Regulator Replacement
.
Did you complete the repair?
| --
| Go to
Power Windows System Check
| --
|
15
| Repair the open in CKT 668 between the left rear window switch
and the left rear window motor. Refer to
Wiring Repairs
in Wiring Systems.
Did you complete the repair?
| --
| Go to
Power Windows System Check
| --
|
