The sunroof switch controls the position of the sunroof panel. The rear of the panel may be tilted into a vent position.
When the sunroof switch is moved to the OPEN/VENT position, power is sent through the vent limit switch to the sunroof motor. The vent limit switch is closed when the sunroof is between the vent position and the fully open position. When the sunroof panel reaches the vent position the following actions occur:
| • | The vent limit switch opens. |
| • | The vent limit switch disconnects the power to the sunroof motor. |
In order to continue to open the sunroof panel, the driver must release the sunroof switch and then press the switch a second time. The sunroof will perform the following functions:
- The sunroof will enter the express mode.
- The sunroof panel will open to the full position. The panel will stop when the sunroof panel switch is pressed again.
When the close switch is pressed, the sunroof panel will close until one of the following actions occurs:
| • | The sunroof switch is released. |
| • | The sunroof panel fully closes. |
The sunroof will automatically stop at the fully open or closed position. The panel will stop when approaching from either of the following positions:
| • | The vent position |
| • | The sliding positions |
The soft stop limit switch senses the fully open or closed position. The soft stop limit switch remains in the open position, except when the sunroof panel is fully open or fully closed.
