Step | Action | Value(s) | Yes | No | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Was the Hydraulic Brake Diagnostic System Check performed? | -- | Go to Step 2 | |||||||||||||
2 | Check the tires for incorrect pressure. Is the tire pressure incorrect? | -- | Go to Step 3 | Go to Step 4 | ||||||||||||
3 | Adjust the tires to the correct pressure. Refer to Tire Inflation Pressure Specifications in Maintenance and Lubrication. Is the repair complete? | -- | -- | |||||||||||||
4 | Inspect the front suspension for loose components. Are there loose components? | -- | Go to Step 5 | Go to Step 6 | ||||||||||||
5 | Tighten the loose components. Refer to Fastener Tightening Specifications in Front Suspension. Is the repair complete? | -- | -- | |||||||||||||
6 | Inspect the brake linings for the following:
Refer to Brake Pad Inspection in Disc Brakes or Brake Shoe Inspection in Drum Brakes. Do any of the above conditions exist? | -- | Go to Step 7 | Go to Step 8 | ||||||||||||
7 | Replace the brake linings. Refer to Brake Pads Replacement in Disc Brakes or Brake Shoe Replacement in Drum Brakes. Is the repair complete? | -- | -- | |||||||||||||
8 | Inspect the brake rotor for the following:
Do any of the above conditions exist? | -- | Go to Step 9 | Go to Step 10 | ||||||||||||
9 |
Is the repair complete? | -- | -- | |||||||||||||
10 | Inspect the brake assembly for loose, broken or missing components. Are there any loose, broken or missing brake assembly components? | -- | Go to Step 11 | Go to Step 12 | ||||||||||||
11 | Tighten or replace loose or missing brake assembly components. Refer to Brake Pads Replacement in Disc Brakes or Brake Shoe Replacement in Drum Brakes. Is the repair complete? | -- | -- | |||||||||||||
12 | Inspect the following brake caliper assembly components for corrosion:
Are any of the above components corroded or sticking? | -- | Go to Step 13 | Go to Step 14 | ||||||||||||
13 | Replace the corroded components. Is the repair complete? | -- | -- | |||||||||||||
14 | Inspect the park brake for improper adjustment. Is the park brake adjusted improperly? | -- | Go to Step 15 | Go to Step 16 | ||||||||||||
15 | Adjust or replace the park brake cable. Refer to Park Brake Cable Service/Adjustment in Park Brake. Is the repair complete? | -- | -- | |||||||||||||
16 | Inspect the front suspension for incorrect alignment. Refer to Wheel Alignment Measurement in Wheel Alignment. Is the wheel alignment incorrect? | -- | Go to Step 17 | Go to Step 18 | ||||||||||||
17 | Correct the front wheel alignment. Refer to Front Caster Adjustment . Is the repair complete? | -- | -- | |||||||||||||
18 | Inspect for contaminated or improper brake fluid. Is the brake fluid contaminated or improper? | -- | Go to Step 19 | Go to Step 20 | ||||||||||||
19 |
Is the repair complete? | -- | -- | |||||||||||||
20 | Inspect for a restricted brake fluid passage. Check for the following:
Refer to Hydraulic Brake System Bleeding . Is there a restricted brake fluid passage? | -- | Go to Step 21 | Go to Step 22 | ||||||||||||
21 |
Is the repair complete? | -- | -- | |||||||||||||
22 | Verify proper brake system operation. Does the original condition still exist? | -- | Go to Step 1 | -- |
