GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 1999 🢒 Sunfire 🢒 Body and Accessories 🢒 Bumpers 🢒 Hood Latch Cover Replacement

Removal Procedure

    Object Number: 282256 Size: SH
  1. Remove the hood latch cover retainers (2).
  2. Remove the hood latch cover (1).
  3. Remove the hood latch release cable from the hood latch. Refer to Hood Primary Latch Release Cable Replacement .

    4. Object Number: 282258 Size: SH
  4. Remove the hood latch bolts (3).
  5. Remove the hood latch (2).

Installation Procedure

    Object Number: 282258 Size: SH
  1. Install the hood latch (2).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the hood latch bolts (3).

    3. Tighten
    Tighten the hood latch bolts to 10 N·m (89 lb in).

  3. Install the hood latch release cable to the hood latch. Refer to Hood Primary Latch Release Cable Replacement .

    4. Object Number: 282256 Size: SH
  4. Install the hood latch cover (1).
  5. Install the hood latch cover retainers (2).