1

Did you perform the Diagnostic System Check for Engine Electrical?

--

Go to Step 2

Go to Diagnostic System Check - Engine Electrical

Start the engine.

Does the battery charge indicator remain illuminated after the bulb check?

--

Go to Step 3

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

1. Install a scan tool
2. With a scan tool, observe the Battery Voltage parameter in the Instrument Panel Cluster data list.

Does the voltage measure within the normal operating range?

10.5-15.5 V

Go to Step 4

Go to Charging System Test

Replace the instrument panel cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gages and Console.

Did you complete the replacement?

--

Go to Step 5

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2