Engine Mount Strut Bracket Replacement for Pontiac Sunfire 2001

1. Remove the engine mount strut. Refer to Engine Mount Strut Replacement .
2. Remove the A/C compressor with the lines attached and position it aside. Refer to Air Conditioning Compressor Replacement .
3. Remove the transmission brace from the engine.



4. Remove the engine mount strut bracket bolts.
5. Remove the engine mount strut bracket.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install the engine mount strut bracket and the bolts.

Tighten
Tighten the strut bracket bolts to 66 N·m (49 lb ft).

2. Install the transmission brace to the engine.
3. Install the A/C compressor. Refer to Air Conditioning Compressor Replacement in HVAC Systems with A/C-Manual.
4. Install the engine mount strut. Refer to Engine Mount Strut Replacement .
5. Lower the vehicle.