GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Sunfire 🢒 Engine 🢒 Engine Controls - 2.2L (LN2) 🢒 Accelerator Control Cable Bracket Replacement

Removal Procedure

    Object Number: 153628 Size: SH
  1. Remove the accelerator cable from the accelerator controls cable bracket.
  2. Remove the cruise control cables from the accelerator controls cable bracket, if the vehicle is so equipped.
  3. Remove the air cleaner outlet resonator assembly. Refer to Air Cleaner Outlet Resonator Replacement .
  4. Remove the accelerator cable bracket attaching bolts (1) and the accelerator cable bracket (2).

Installation Procedure

    Object Number: 153628 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the accelerator cable bracket (2) with attaching bolts (1).

    2. Tighten
    Tighten bolts to 10 N·m (89 lb in).

    Notice: Align the accelerator bracket with the accelerator cam in order to prevent cable wear which could cause the cable to break.

  2. Install the air cleaner outlet resonator assembly. Refer to Air Cleaner Outlet Resonator Replacement
  3. Install the accelerator cable and the cruise control cables, if the vehicle is so equipped.