GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Sunfire 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle

Removal Procedure
  1. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement - On Vehicle .

    2. Object Number: 307332 Size: SH
  2. Remove the 2 retaining screws from the multifunction switch  (2).
  3. Remove the multifunction switch (2) from the steering column.
  4. Disconnect the electrical connectors from the multifunction switch (2).

Installation Procedure
  1. Connect the electrical connectors to the multifunction switch (2).

    2. Object Number: 307332 Size: SH
  2. Install the multifunction switch (2) to the steering column while depressing the spring loaded horn pin.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the 2 retaining screws to the multifunction switch (2).

    4. Tighten
    Tighten the screws to 4 N·m (36 lb in).

  4. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement - On Vehicle .
  5. Ensure that the multifunction switch functions properly.