GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 655848  Size: SH
  1. Remove the screws from the data link connector.
  2. Reposition the data link connector from the instrument panel.

Installation Procedure


    Object Number: 655848  Size: SH
  1. Position the data link connector to the instrument panel.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws to the data link connector.
  4. Tighten
    Tighten the data link connector screws to 2 N·m (18 lb in).