Engine Mechanical Specifications. Pontiac Sunfire 2001

For 1990-2009 cars only

Makes 🢒 Pontiac 🢒 2001 🢒 Sunfire 🢒 Engine 🢒 Engine Mechanical - 2.2L 🢒 Engine Mechanical Specifications

Application	Specifications
Application	Metric	English
General Data
Engine Type	L-4
Regular Production Option (RPO) Code LN2 VIN Code 4/L43 VIN Code 5
Displacement	2.2 L	134 CID
Bore	89 mm	3.5 in
Stroke	88 mm	3.46 in
Compression Ratio	9:1
Firing Order	1-3-4-2
Oil Pressure @ 65°C (150°F)	348 kPa	56 psi @ 3000 RPM
Camshaft
Journal Clearance	0.038-0.088 mm	0.0015-0.0035 in
Journal Diameter	47.453-47.478 mm	1.868-1.869 in
Lobe Lift - Inlet and Exhaust	6.687 mm	0.2633 in
Crankshaft
Crankshaft End Play	0.0511-0.1780 mm	0.002-0.007 in
Main Bearing Clearance	0.015-0.047 mm	0.0006-0.0019 in
Main Journal Diameter	63.360-63.384 mm	2.4945-2.4954 in
Main Journal Out Of Round	0.005 mm	0.00019 in
Main Journal Taper	0.005 mm	0.00019 in
Rod Bearing Journal Clearance	0.025-0.079 mm	0.00098-0.0031 in
Rod Bearing Journal Diameter	50.758-50.784 mm	1.9983-1.9994 in
Rod Bearing Journal Out Of Round	0.005 mm	0.00019 in
Rod Bearing Journal Taper	0.005 mm	0.00019 in
Rod Side Clearance	0.10-0.38 mm	0.0039-0.0149 in
Cylinder Bore
Diameter	88.991-89.009 mm	3.5036-3.5043 in
Lubrication System
Oil Capacity Without Filter Change	3.473 L	3.5 qts
Oil Pressure (3000 RPM @ 65°C (150°F)	348 kPa	56 psi min.
Out Of Round Maximum	0.013 mm	0.0005 in
Taper - Thrust Side Maximum	0.013 mm	0.0005 in
When Changing the Oil Filter, Up to an Additional 0.473 Liter or One Half Quart of Oil May Be Needed. Filter Type or Equivalent	PF-47
Cylinder Head
Cylinder Head Deck Face - Overall Maximum Flatness	0.08 mm	0.003 in
Cylinder Head Deck Face - Maximum Flatness within any 150 mm (5.92 in) length	0.05 mm	0.002 in
Cylinder Head Deck Face - Maximum Flatness within 25 mm (0.984 in) length	0.025 mm	0.001 in
Oil Pump
End Clearance	0.05-0.18 mm	0.002-0.007 in
Gear Diameter - Drive Gear	38.05-38.10 mm	1.498-1.50 in
Gear Diameter - Idler	38.05-38.10 mm	1.498-1.5 in
Gear Lash	0.094-0.195 mm	0.004-0.008 in
Gear Length - Drive Gear	30.45-30.48 mm	1.199-1.20 in
Gear Length - Idler	30.45-30.48 mm	1.199-1.20 in
Gear Pocket Depth	30.36-30.44 mm	1.195-1.198 in
Gear Pocket Diameter	38.18-38.25 mm	1.503-1.506 in
Gear Side Clearance - Drive Gear	0.038-0.102 mm	0.001-0.004 in
Gear Side Clearance - Idler	0.038-0.102 mm	0.001-0.004 in
Oil Pump Drive to Driven Gear Backlash	0.23-0.51 mm	0.0091-0.0201 in
Outer Gerotor Thickness	17.087-17.099 mm	0.6727-0.6731 in
Valve to Bore Clearance	0.038-0.089 mm	0.0015-0.0035 in
Piston
Clearance - 42.7 mm from top of piston
Factory Specification	0.015-0.047 mm	0.00059-0.00185 in
Service Specification	0.015-0.087 mm	0.0006-0.0034 in
Piston Pin
Clearance In Piston	0.0079-0.018 mm	0.00031-0.00071 in
Diameter	20.3200-20.3251 mm	0.8000-0.8002 in
Interference Fit In Rod	0.021-0.0511 mm	0.0008-0.002 in
Piston Ring Compression
Second Groove Side Clearance	0.02-0.08 mm	0.0008-0.0031 in
Second Ring Gap	0.30-0.45 mm	0.0012-0.0177 in
Top Groove Side Clearance	0.05-0.09 mm	0.0020-0.0035 in
Top Ring Gap	0.25-0.50 mm	0.010-0.020 in
Piston Ring Oil
Gap	0.25-0.76 mm	0.010-0.030 in
Groove Clearance	0.013-0.220 mm	0.0005-0.0087 in
Valve System
Rocker Arm Ratio	1.6
Valve Face Angle	45°
Valve Face Runout	0.038 mm	0.0014 in
Valve Guide Inside Diameter	7.000-7.020 mm	0.275-0.276 in
Valve Head Diameter - Exhaust	37 mm	1.45 in
Valve Head Diameter - Inlet	44 mm	1.73 in
Valve Margin - Exhaust	2.21-1.79 mm	0.087-0.070 in
Valve Margin - Inlet	1.56-1.16 mm	0.061-0.046 in
Valve Overall Length - Exhaust	127 mm	5.00 in
Valve Overall Length - Inlet	134.23 mm	5.28 in
Valve Seat Width - Exhaust	3.51 mm	0.138 in
Valve Seat Width - Inlet	2.80 mm	0.110 in
Valve Springs Free Length	48.7 mm	1.91 in
Valve Springs Load - Closed	361-325 N @ 40.64 mm	81.2-73.1 lb @ 1.600 in
Valve Springs Load - Open	957-893 N @ 29.85 mm	215-201 lb @ 1.175 in
Valve Stem to Guide Clearance - Exhaust	0.035-0.075 mm	0.0014-0.0029 in
Valve Stem to Guide Clearance - Inlet	0.019-0.053 mm	0.0007-0.0020 in
Valve Tip to Retainer Groove Centerline - Exhaust	5.38-5.90 mm	0.212-0.232 in
Valve Tip to Retainer Groove Centerline - Intake	4.94-5.46 mm	0.194-0.215 in

Application	Specifications
Application	Metric	English
General Data
Engine Type	L-4
Regular Production Option (RPO) Code LN2 VIN Code 4/L43 VIN Code 5
Displacement	2.2 L	134 CID
Bore	89 mm	3.5 in
Stroke	88 mm	3.46 in
Compression Ratio	9:1
Firing Order	1-3-4-2
Oil Pressure @ 65°C (150°F)	348 kpa	56 psi @ 3000 RPM