For 1990-2009 cars only
Removal Procedure
- Open the rear compartment lid.
- Lift upward on the inner edge of the sill trim plate and remove the plate from the rear body panel.
- Remove the rear compartment spare tire cover.
- Remove the cargo net, if equipped.
- Remove the push-in retainers (2) near the tail lamps, if equipped.
- Fold down the rear seat back.
- Remove the push-in retainer from the left rear shock tower.
- Fold the right section of the rear compartment trim panel toward the center of the compartment and remove it.
Installation Procedure
- Install the trim panel into the rear compartment.
- Adjust the trim panel to the desired appearance.
- Align the trim panel with the slots in the rear body panel, and press until the plate clips are fully engaged.
- Install the rear compartment spare tire cover.
- Install the push-in retainers (2) near the tail lamps, if equipped.
- Install the cargo net, if equipped.
- Return the rear seat back to its upright position.
- Install the push-in retainer to the left rear shock tower.
- Close the rear compartment lid.
