Fog Lamp Switch Replacement Chevrolet

1. Remove the instrument panel accessory trim plate to access the fog lamp switch. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gages, and Console.
2. Release the retainers on the fog lamp/dimmer switch housing using a small flat-bladed tool.
3. Remove the fog lamp/dimmer switch (3) housing from the instrument panel accessory trim plate.
4. Release the retainers on the fog lamp switch using a small flat-bladed tool.
5. Remove the fog lamp switch from the fog lamp/dimmer switch (3) housing.

1. Install the fog lamp switch to the fog lamp/dimmer switch housing, pressing into place until fully seated.
2. Install the fog lamp/dimmer switch (3) housing to the instrument panel accessory trim plate, pressing into place until fully seated.
3. Install the to the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gages, and Console.

Fog Lamp Switch Replacement Pontiac

1. Remove the fog lamp/dimmer switch trim plate from the instrument panel using a small flat-bladed tool.



2. Disconnect the electrical connectors from the fog lamp/dimmer switches.



3. Remove the fog lamp/dimmer switch bulb using a small flat-bladed tool turning counterclockwise, if required.



4. Release the retainer tabs on the fog lamp switch using a small flat-bladed tool on the back side.



5. Remove the fog lamp switch from the trim plate.

1. Install the fog lamp switch to the trim plate pressing into place until fully seated.



2. Install the fog lamp/dimmer switch bulb using a small flat-bladed tool turning clockwise, if required.



3. Connect the electrical connectors to the fog lamp/dimmer switches.



4. Install the fog lamp/dimmer switch trim plate to the instrument panel pressing into place until fully seated.