Info - Engineering Changes to the Valve Body, Pressure Regulator Valve, 2-3 Accumulator Valve and Bore for 2002-2003 Model Year 4T45E Transaxles and Subsequent Overhaul Procedures Which Affect 1995-20
| Subject: | Engineering Changes to the Valve Body, Pressure Regulator Valve, 2-3 Accumulator Valve and Bore for 2002-2003 Model Year 4T45E Transaxles and Subsequent Overhaul Procedures Which Affect 1995-2001 Model Year Transaxles |
| Models: | 1995-2003 Chevrolet Cavalier |
| 1997-2003 Chevrolet Malibu |
| 1997-1999 Oldsmobile Cutlass |
| 1999-2003 Oldsmobile Alero |
| 1995-2003 Pontiac Sunfire |
| 1999-2003 Pontiac Grand Am |
| 1999-2001 Toyota Cavalier |
| with 4T40E or 4T45E Transaxle (RPOs MN4 or MN5) |
The design of the pressure regulator valve changed with the introduction of the 2002 model year transmissions.
Important: Shift quality of a repaired transaxle will be compromised if attention is not paid to the pressure regulator valve, spacer plate and gaskets.
The pressure regulator valve (1) shown at the above left is the design used through the 2001 model year. The arrows point to the cross drilling within the valve.
The pressure regulator valve (2) shown at the right is of the 2002 and newer valve which is a solid valve, not cross drilled.
Shown above is the valve body and the internal components of the 2001 and prior model years valve body.
The pressure regulator valve is #328. This pressure regulator valve is cross drilled as shown above. In addition, you will see the 2-3 accumulator bore with its components, #329 and 330. The service replacement valve body kit, P/N 24224399, for the 1995-2001 transaxles is of this same configuration. The pressure regulator valve in the service replacement valve body is not cross drilled and requires installation of the spacer plate and gaskets supplied with kit, P/N 24224399.
Shown above is the valve body and the internal components of the 2002 - 2003 valve body.
The pressure regulator valve is #328. The pressure regulator valve is not cross drilled. You will also see that the 2-3 accumulator bore and its components are no longer present.
When servicing a 1995 through 2001 4T40E/4T45E transaxle, the pressure regulator valve #328 must be changed (it is included in the overhaul kit, P/N 24224525). Also included in this overhaul kit is the new spacer plate and gaskets required when the pressure regulator valve is replaced in the valve body.
Parts Information
Model year | Description | Part N umber | Includes | Important Note: |
|---|---|---|---|---|
1995 - 2001 | Overhaul Kit | 24224525 | A new solid (non-cross drilled) pressure regulator valve, and the new style spacer plate, all gaskets, seals, and plates | When Valve body part number 24224399 is used, you must use spacer plate and gasket kit number 24224336. |
2002 - 2003 | Overhaul Kit | 24224526 | All gaskets, seals, and plates | Do not use spacer plate and gasket kit 24224336 on a 2002 or 2003 transaxle. Incorrect pressures will result and the transaxle will not operate properly. |
1995-2001 | Spacer Plate and Gasket Kit | 24224336 | This kit contains (2) spacer plate gaskets, (1) service only spacer plate gasket, and a non-cross drilled pressure regulator valve. | This kit is to be used when a valve body is serviced. i.e.: cleaned, or removed for any reason. Replacement of the pressure regulator with the non-crossed drilled regulator is essential. |
1995 - 2001 | Service Replacement Valve Body Kit | 24224399 | Includes the Service Replacement Valve Body with the new solid pressure regulator valve , spacer plate and gaskets, which must be used together or incorrect transaxle operation will result. | When repairing a 1995 - 2001 Transaxle, you must use the spacer plate and gasket kit supplied with this service replacement valve body kit. |
Parts are currently available from GMSPO.
