Radio Speaker Amplifier Replacement for Pontiac Sunfire 2003

1. Pull back the rear compartment trim panel to gain access to the amplifier. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.
2. Remove the amplifier nuts.

Remove the amplifier from the bracket.

3. Disconnect the electrical connector from the amplifier.

1. Connect the electrical connector to the amplifier.
2. Install the amplifier to the bracket.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the amplifier nuts.

Tighten
Tighten the nuts to 3.5 N·m (31 lb in).

4. Reposition the rear compartment trim panel. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.