STEERING SHORT GEAR INSTALLAT. COST & PART NUMBER INFORMATION

"Short Gear" rack and pinion assemblies are available for service replacement. The short gear is a complete gear assembly except for the following:

End Takeoff Gear Center Takeoff Gear ---------------- ------------------- 1. Inner and outer tie rod 1. Inner and outer tie rod assemblies assemblies

2. Tie rod boots

3. Breather tube

4. Attachment hardware

Boot clamps are included with the short gear.

Use of the short gear is recommended when the expense of individual parts and required labor necessary to service a rack and pinion assembly would exceed the expense of installing the short gear assembly. The short gear incorporates all product improvements made since 1982.

Refer to the appropriate service manual for information on parts transfer or R&R procedures.

CAUTION:

Failure to disconnect the intermediate shaft from the rack and pinion stub shaft prior to lowering the cradle can result in damage to the steering gear andlor intermediate shaft. Operation of the vehicle with this damage can cause loss of steering control which could result in personal injury.

REPLACEMENT APPLICATION

Year & Model Gear Part No. ------------ ------------- 1982-84 6000, Phoenix 7846792 1982-84 6000, Phoenix 7846779 with Rally Tuned Suspension (Y99 or Y95) and 6000 STE 1982-84 2000 7847127

Operation Labor Usage Year/Model Number Time ----- ---------- ------ ---- Automatic Transaxle 1982 6000, Phoenix E9730 1.7 Automatic Transaxle 1983 6000, Phoenix E9730 2.1 Automatic Transaxle 1984 6000, Phoenix E9730 2.2 Manual Transaxle 1982-84 Phoenix E9730 1.9 Manual/Automatic 1982-84 2000 Sunbird E9730 2.3 Transaxle

Use applicable trouble code and failed part number.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.