Removal Procedure
- Disconnect the negative battery cable (1).
Refer to
Battery Negative Cable Disconnection and Connection
.
- Loosen the battery positive cable terminal bolt.
- Disconnect the battery positive cable (2) from the battery.
Caution: Do not tip the battery over a 45 degree angle or acid could spill causing
serious personal injury.
- Loosen the battery hold down bolt.
- Remove the battery from the battery box.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
Caution: Do not tip the battery over a 45 degree angle or acid could spill causing
serious personal injury.
- Install the battery to the battery box.
Tighten
Tighten the battery hold down bolt to 15 N·m
(11 lb ft).
- Connect the positive battery cable (2) to the
battery.
Tighten
Tighten the positive battery terminal bolt to 17 N·m
(13 lb ft).
- Connect the negative battery cable (1) to the battery.
Refer to
Battery Negative Cable Disconnection and Connection
.