GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Torrent 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Front Internal Gear and Low and Reverse Clutch Plate Assembly Installation

Tools Required

J 28585 Snap Ring Remover


    Object Number: 749518 Size: SH
  1. Install the front internal gear thrust washer race (530) on top of the output gear assembly.
  2. Install the front internal gear thrust bearing assembly (519) on top of the front internal gear thrust washer race (530).

    3. Important: The front internal gear (526) should turn freely counterclockwise, and should lock clockwise.

  3. Install the front internal gear and overrun roller clutch assembly (526).

    4. Object Number: 749504 Size: SH
  4. Install the low and reverse clutch backing plate (515)
  5. Install the 3 steel plates (517) and the 4 fiber plates (516).
  6. Install the low and reverse clutch backing plate (515).

    7. Object Number: 749503 Size: SH
  7. Using J 28585 install the low and reverse clutch plate retaining ring (518), aligning the openings of the retaining ring towards the dowel pin in the case. Both ends of the retaining ring lock in the lug.