Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Remove the lower shock bolt.
- For right side only, remove splash shield.
- Remove the upper shock bolt.
- Remove the shock from the vehicle.
Installation Procedure
- Install the shock to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the upper shock bolt.
Tighten
Tighten the bolt to 110 N·m (81 lb ft).
- For right side only, install splash shield.
- Install the lower shock bolt.
Tighten
Tighten the bolt to 110 N·m (81 lb ft).
- Lower the vehicle.