GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the instrument panel (I/P) trim bezel from the center stack. Refer to Instrument Panel Accessory Bezel Replacement in Instrument Panel, Gages and Console.

  2. Object Number: 1344255  Size: SH
  3. Remove the screw that retains the center air deflector assembly to the I/P trim bezel. Remove the air deflector assembly.

  4. Object Number: 1344250  Size: SH
  5. Use a flat-bladed tool to release the fasteners on the fog lamp switch.

  6. Object Number: 1246237  Size: SH
  7. Disconnect the electrical connector and remove the fog lamp switch.

Installation Procedure


    Object Number: 1344250  Size: SH
  1. Align the fog lamp switch with the center air deflector assembly and snap into place.
  2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1344255  Size: SH
  3. Install the center air deflector assembly to the I/P trim bezel.
  4. Tighten
    Tighten the screw to 2.5 N·m (22 lb in).


    Object Number: 1246237  Size: SH
  5. Connect the electrical connector to the fog lamp switch.
  6. Install the I/P trim bezel. Refer to Instrument Panel Accessory Bezel Replacement in Instrument Panel, Gages, and Console.
  7. Test the fog lamp switch for proper operation.