Strategy Based Diagnostics
- Perform
Diagnostic System Check - Vehicle
in Vehicle DTC Information before using the symptom tables if applicable.
- Review the system operations in order to familiarize yourself with the
system functions. Refer to
Disassembled Views
,
Engine Component Description
,
Drive Belt System Description
, and
Lubrication Description
.
All diagnosis on a vehicle should follow a logical process. Strategy based diagnostics
is a uniform approach for repairing all systems. The diagnostic flow may always be
used in order to resolve a system problem. The diagnostic flow is the place to start
when repairs are necessary. For a detailed explanation, refer to
Strategy Based Diagnosis
in General Information.
Visual/Physical Inspection
| • | Inspect the easily accessible or visible system components for obvious
damage or conditions which could cause the symptom. |
| • | Check for the correct oil level, proper oil viscosity, and correct filter
application. |
| • | Verify the exact operating conditions under which the concern exists.
Note factors such as engine RPM, ambient temperature, engine temperature, amount of
engine warm-up time, and other specifics. |
| • | Compare the engine sounds if applicable to a known good engine and make
sure you are not trying to correct a normal condition. |
Intermittent
Test the vehicle under the same conditions that the customer reported in order
to verify the system is operating properly.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to
diagnose the symptom:
