GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Torrent 🢒 Preface 🢒 Cautions and Notices 🢒 Instrument Panel Lower Trim Panel Replacement - Right Side

Removal Procedure

    Object Number: 1407407 Size: SH
  1. Remove the cluster trim bezel.

    2. Object Number: 1344259 Size: SH
  2. Remove the center console trim bezel from the instrument panel (I/P).

    3. Object Number: 1347818 Size: SH
  3. Open the compartment door to expose the trim panel fasteners and the end cap bolt.

    4. Object Number: 1347816 Size: SH
  4. Remove the right side end cap.

    5. Object Number: 1407410 Size: SH
  5. Remove the upper I/P trim pad. Refer to Instrument Panel Upper Trim Panel Replacement .

    6. Object Number: 1350065 Size: SH
  6. Remove the fasteners holding the trim pad - right. Remove the trim panel from the vehicle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1350065 Size: SH
  1. Align the trim panel with the I/P. Fasten in place.

    2. Tighten
    Tighten the fasteners to 2.5 N·m (22 lb in).


    Object Number: 1407410 Size: SH
  2. Install the upper trim pad. Refer to Instrument Panel Upper Trim Panel Replacement .

    3. Object Number: 1347816 Size: SH
  3. Install the right side end cap. Fasten in place.

    4. Tighten
    Tighten the fasteners to 2.5 N·m (22 lb in).


    Object Number: 1344259 Size: SH
  4. Align the center console trim bezel. Snap the bezel into place.

    5. Object Number: 1407407 Size: SH
  5. Align the I/P cluster trim bezel. Fasten the bezel into place.

    6. Tighten
    Tighten the fasteners to 2.5 N·m (22 lb in).

  6. Close the compartment door.
  7. Inspect the I/P for proper operation.