Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine Running | |||
Battery Voltage | Data Display | Volts | 13.9 Volts |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine Running | |||
Battery Voltage Signal | Data Display/ABS Data | Volts | 13.9 Volts |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF | |||
Crank Request Signal | ECM, Data Display, Electrical/Theft Data | Yes/No | No |
EPM Inhibit Reason | ECM, Data Display, Electrical/Theft Data | None, DLC Override, Fuel Demand, OBD Demand, MAF Demand, Deact Demand, TCM Demand | None |
GEN F-Terminal Signal | ECM, Data Display, Electrical/Theft Data | % | 0% |
GEN L-Terminal Circuit Status | ECM, Data Display, Electrical/Theft Data | Incomplete, Short Gnd/Open, Short to B+, OK | OK |
GEN L-Terminal Signal Command | ECM, Data Display, Electrical/Theft Data | On/Off | Off |
Ignition 1 Signal | ECM, Data Display, Electrical/Theft Data | Volts | Varies |
Ignition Accessory Signal | ECM, Data Display, Electrical/Theft Data | On/Off | On |
PNP Switch (If Equipped) | ECM, Data Display, Electrical/Theft Data | Park/Neutral/In Gear | Park |
Starter Relay Command | ECM, Data Display, Electrical/Theft Data | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Transmission in Park | |||
TR Sw. | Engine Electrical | Invalid, Park, Reverse, Neutral, Drive 5, Drive 4, Drive 3, Drive 2, Drive 1 | Park |
